| WATER TANKER |
| |
| ATLAS Water Tankers are precisely designed and
fabricated in cylindrical, elliptical and 'D' shape to suit
specification of truck chassis manufacturer and customers requirements
for handling drinking water, salt water and agricultural water. The tank
superstructure is fabricated of high strength heat treated fine grain
steel which conforms to ASTM standards SA 36 grade or equivalent which
gives strength and durability. |
| RANGE : |
| ATLAS water tankers covers capacities from 1000
I.G.to 5000 I.G. and 6000 I.G. to 12000 I.G.for tanker
semi-trailers. |
| THE TANK : |
| The tank shell is precisely rolled on CNC Plate
Bending Machine from steel plates. The ends of the tank are closed with
dished and flanged ends. Internally fitted with transverse anti - surge
baffles with manholes for access between compartments. |
| MAN HOLES : |
| Man holes are provided on top of the tank of size
20" dia.with filling hatch of 10" and pressure vent. |
| PIPING, VALVES & FITTING
: |
| Depending upon the capacity and flow rate of the
contents suitable piping, brass/stainless steel valves and galvanized
fittings are provided. The pipeline internal surface is suitably coated.
A gravity outlet at the bottom, with filling and discharge nozzles are
provided at the rear bottom end of the tank. |
| PUMP : |
| Self priming centrifugal pump petrol/diesel engine
driven or power take off driven pump fitted on the tank are easy to
start and use, more efficient, economical operation with low noise and
vibration level. Capacities ranges from 70 usg/min.to 350
usg/min.depending upon capacity of the tank. |
| ACCESSORIES : |
| Following accessories are standard on ATLAS water
tankers.; |
•
•
•
•
•
•
|
Discharge/filling hose 3 mtrs length. - 4 nos.
Hose box on either side of the tank.
Steel mud guards with rubber mud flaps.
Access ladder at rear of the tank and G.I. walk way on the top of the tank.
Side lamps along the left and right side of the tank.
Rear bumper with reflector. |
| SURFACE TREATMENT : |
•
•
•
|
Blasted to S.A. 2.5 Swedish standards.
Internal Painting : Epoxy paint system to customers specification.
External Painting : Primed and finish coated in single color enamel paint system to customers choice. |
| OPTIONAL AT ADDITIONAL COST
: |
•
•
•
|
PTO driven pump.
Spray bar with nozzle.
360 degree rotating beacons. |
| |
