| TRANSIT MIXERS |
| |
ATLAS - BARYVAL Transit Mixers is available
in collaboration with M/s.Baryval of Spain Export AG of German
for operating under severe conditions in the Gulf region. Baryval
has been building truck mixers for 30 years, they are tested
and developed in extensive test programmes and are in operation
all over the world. Their immense experience is based on this
exceptionally varied range of operating conditions.
Al Shirawi Equipment Co.LLC draws on the high
technical expertise of M/s.Baryval and available Transit Mixers here in
the U.A.E.
The ATLAS- Baryval Mixer boasts of an all high
grade special 27 MnB5 or equivalent wear resistant steel construction,
separate oil circuits for power hydraulics and transmission to ensure
maximum reliability. Compact oil cooling system with thermostat control,
10 litre oil tank with intake-side filter system, filter with shutoff
valve. Drain valves for drip-free oil changes. Double walled, enclosed
water-tank support bracket, tank with rubber mountings, water system
with German TUV test certificate. Welded spiral blades 400 mm in
diameter, or 450 mm at discharge end. Standard wear protection (Liebherr
system) welded to the sides. Low overall centre of gravity improves the
truck's handling : low loading height, minimum headroom required.
Divided rear mudguard's, mounted on plastic underlays. Generously
dimensioned support ring, to match overall mixer size. Discharge hopper
with screw adjustment, inclined end panel for easier cleaning. Wear
plates in input hopper and pivoting chute as standard equipment. The
side plate system enables the mixer subframe to be rigidly.
fixed at close enough intervals over its entire
length to form the all important composite with the chassis, without
compromising the ability of the body to flex as necessary to avoid
stress damage and, or misalignment occurring within the mixer
superstructure. Access ladder with large, highm, mounted platform.
Enclosed-pattern support structure for pivoting chute, designed to
withstand severe loads. |
| Wear protection on the spiral
blades. |
| Wear protection is standard on the sides of the
spiral blades, to prolong their operating life. It prevents radial
cracks occurring and can easily be renewed. |
| Separate drive unit. |
| Power can also be taken from a separate engine.
ATLAS Baryval uses Deutz engines as standard. There is a noise
insulating hood if strict emission limits have to be complied with. |
| |
|
